The Altona Test Suite Application Kit is a standard test form for controlling the printing conditions according to ISO 12647 and the examination of RIPs according to ISO 15930 (PDF/X-3).

The Ugra Display Analysis and Certification Tool offers for the first time the possibility of certifying calibrated displays for soft-proofing. The tool can be used with all common measruing devices.

 The Ugra Proof and Print Certification Tool offers the possibility of certifying poofs and prints. 

The Ugra Proof and Print Certification Tool offers the possibility of certifying poofs and prints. 

For the control of the correct illumination for digital proofs and prints.

The metamerism card is used to check the standard illumination from time to time.

The metamerism card is used to check the standard illumination from time to time.

The Visual Print Reference consists of RGB-, CMYK-data and reference prints on 8 test pages with selected images, in order to monitor the entire print workflow from the RGB-data to the standardized print according to ISO 12647-2 or ISO 12647-3.

The Visual Print Reference consists of RGB-, CMYK-data and reference prints on 8 test pages with selected images, in order to monitor the entire print workflow from the RGB-data to the standardized print according to ISO 12647-2 or ISO 12647-3.

The Ugra/Fogra Media Wedge CMYK is the standard tool for the control of the color transformation form the data to the digital proof or the printing

Like all complex systems, digital plate setters, also known as computer to plate systems, require suitable control aids in order to monitor output quality during daily production and to be able to guarantee production standards. 

The Ugra/Fogra PostScript Control Strip is a manufacturer independent tool for process and quality control in electronic publishing systems.

For the newspaper printing the test pages are available in the broad sheet and in the tabloid format. The reference printings are available on different papers.

The Ugra/Fogra Digital Print Scale is a vendor-neutral tool for process and quality control in electronic publishing systems.

In the course of the increasing digitalization of the prepress stages the trend tends towards making full-page films, drawn essentially from digital databases in laser exposure units. 

The Ugra/Fogra Media Wedge CIELAB is designed for the testing of color gamut and color rendition on output systems and Colour Management Systems as well as output profiles.

The Ugra Offset Control Wedge 1982© is intended for controlling the analogue plate-making process. Furthermore, it is possible to use it for some evaluations in the proofing process and for printing tests.

If two surfaces in contact one with the other, are rubbed together, the result of this kind of pressure is called friction. The term «abrasion resistance» has the same meaning as the term «friction resistance». «Wipe resistance» or «wet abrasion resistance» are however not the same as normal abrasion resistance. It is an essential condition of testing for abrasion resistance of paper or cardboard prints that the printed test sample is dry.

The Ugra Screen Ruling Indicator is a piece of transparent film with the dimension 86 x 55 mm.

The reference for the tonal value measurement on printing plates. The FMB consists of an offset printing plate, which is precisely measured. Thus the measuring accuracy of a screen measuring device can be evaluated.

This extended Ugra Mearuing Ruler for the i1 can be used for the measurement of different control wedges; e.g. the ECI/bvdm tvi 10 (i1) wedge can be measured with it as well.